home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Light ROM 4
/
Light ROM 4 - Disc 1.iso
/
text
/
maillist
/
1995
/
0295.doc
/
000139_owner-lightwave-l _Wed Feb 8 23:21:10 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-03-19
|
2KB
Return-Path: <owner-lightwave-l>
Received: by netcom21.netcom.com (8.6.9/Netcom)
id WAA15557; Wed, 8 Feb 1995 22:29:45 -0800
Received: from mv.mv.com by netcom21.netcom.com (8.6.9/Netcom)
id WAA15499; Wed, 8 Feb 1995 22:29:32 -0800
Received: by mv.mv.com (8.6.9/mv(b)/mem-940616)
id BAA15979 for lightwave-l@netcom.com; Thu, 9 Feb 1995 01:29:37 -0500
Received: by fusion.mv.com (V1.16/Amiga)
id AA003qs; Wed, 8 Feb 95 23:02:41 EST
Date: Wed, 8 Feb 95 23:02:41 EST
Message-Id: <9502090402.AA003qr@fusion.mv.com>
Message-Id: <202d0e8f.86480-mark@fusion.mv.com>
In-Reply-To: <9502072350.AA06043@soulcage.>
(from "William Walter Ford" <bford@soulcage.inmind.com>)
(at Tue, 7 Feb 1995 18:50:30 -0500 (EST))
X-Mailer: //\\miga Electronic Mail (AmiElm 4.159)
From: mark@fusion.MV.COM (Mark Thompson)
To: lightwave-l@netcom.com
Subject: Re: Drill Bit Obj
Sender: owner-lightwave-l@netcom.com
Precedence: bulk
"William Walter Ford" <bford@soulcage.inmind.com> writes:
> Does anybody have an object of a drill bit, or a suggestion on how to
> make one.
The method I prefer is to create a bit cross section (a disc with two
side cutouts), extrude it with lots of segments, then use twist to
make the cutouts swirl down the length. Finally, use a boolean subtract
to cut a point. Make sure to triple all non-planar polys before the
boolean.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
* Mark Thompson (603) 424-1829 *
* Fusion Films Inc. mark@fusion.mv.com *
* Radiant Image Productions *
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~